 |
Ultra X3 1000W ATX Power Supply
Article navigation
Layout and cables continued
The Ultra X3 1000W ATX power supply comes with assorted modular FlexForce cables and connectors. FlexForce Cables are designed to be easily routed and hidden within your case. Special design promotes easy cable management and 30% better airflow than ordinary cables because it can be easily routed under motherboard, behind drive bays, etc.
On the picture below you can see modular X3's connectors.
All of the cables are flat, and connectors are labeled to make the process of hooking them up simple and easy. Here you can see Main ATX, 8-pin EPS12V and ATX12V P4 cables.
Four 6-pin and two 8-pin PCI-Express cables.
There are four cables with nine 4-pin Molex connectors and two Floppy connectors.
Four cables featuring 10 SATA connectors can be seen below.
On the following picture you can see an additional cable with 4-pin Molex connector, which brings it to the total of 10. A nice addition is a cable with three 2-pin "male" fan connectors.
|
|
|
