 |
Thermaltake Toughpower CableManagement 1200W Power Supply
Article navigation
Layout and cables continued
From the picture below, you can see the +12V rails distribution on the modular connectors. As I mentioned in the Features and Specifications, +12V rail has following distribution:
+12V Output Distribution:
+12V1 > Main ATX, 4-pin Molex, SATA and Floppy connectors
+12V2 > 4+4 pin EPS12V and 8-pin EPS12V connectors
+12V3 > 8-pin EPS12V, 2x6-pin PCI-e and 1x8-pin PCI-e connectors
+12V4 > 1x6-Pin PCI-e and 2x8-Pin PCI-e connectors
The Thermaltake Toughpower CableManagement 1200W Power Supply comes with its native and modular cables. The native cables consist of:
Main 20+4 Pin motherboard power connector
1 8-Pin EPS12V connector
1 4+4 Pin EPS12V connector
The 4+4 connector is a 8-pin EPS12V connector. It can be split and work with older motherboards which use a 4-pin for power.
The Toughpower's cables are nicely and fully sleeved from power supply to the last connector.
There is a total of three of 6-pin and three of 8-pin PCI-e modular cables, including three 8-pin to 6-pin PCI-e adapters.
On the following picture you can see two modular cables with a total of eight SATA connectors and two modular cables with a total of eight 4-pin Molex, including two floppy connectors.
|
|
|
