 |
Tagan ITZ 1300W Power Supply
Article navigation
Layout and cables continued
The Tagan ITZ 1300W power supply is not a modular unit, and some of you will need to hide the unused cables. But this is not a big deal. Many power supplies on the market today still do not utilize modular technology.
Cables/Connectors:
| Qty |
Cable
Description |
Length (mm) |
1 |
24 pin main power cable |
500 |
| 1 |
4 Pin +12V cable |
550 |
1 |
8 Pin EPS cable |
550 |
|
2 |
6 Pin PCI-Express |
550 |
|
2 |
8 Pin PCI-Express |
550 |
|
1 |
Two 6 Pin PCI-Express Physic Card power adapters |
550 |
|
3 |
Four SATA power adapters |
500 |
|
2 |
Three 4 pin Molex power adapters |
500 |
|
1 |
One 4 pin Molex power adapter |
250 |
|
1 |
Ground wire |
500 |
|
1 |
4 pin Molex to FDD Y-cable with two FDD connectors |
150 |
|
4 |
SATA to Molex adapter |
|
|
On the following picture you can see 24 pin main power cable, 4 Pin +12V cable, 8 Pin EPS cable and Ground wire.
All cables are fully sleeved with high quality mesh sleeves, except for the four PCI Express cables (2x6-Pin and 2x6+2-Pin). These are sleeved with high-grade vinyl, shielded and have EMI filters added to enhance video performance by stabilizing the output current to the video cards.
Here you can see three 4-Pin Molex cables with a total of 7 Molex connectors.
On the following image you can see three SATA cables with a total of 12 connectors.
|
|
|
